Shell Gadus S3 V220C 2 MSDS

Shell Gadus S3 V220C 2 MSDS

 

Material Safety Data Sheet

SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE

COMPANY/UNDERTAKING

1.1 Product Identifier

Material Name : Shell Gadus S3 V220C 2

Product Code : 001D8425

1.2 Relevant identified uses of the substance or mixture and uses advised against

Product Use : Automotive and industrial grease.

Uses Advised Against : This product must not be used in applications other than those

recommended in Section 1, without first seeking the advice of

the supplier.

1.3 Details of the Supplier of the safety data sheet

Manufacturer/Supplier : Shell Deutschland Oil GmbH

Suhrenkamp 71-77

D-22335 Hamburg

Telephone : (+49) 40 6324-6255

Fax : (+49) 40 6321-051

Email Contact for

Safety Data Sheet

: If you have any enquiries about the content of this SDS please

email lubricantSDS@shell.com

1.4 Emergency Telephone Number

: (+49) 30 3068 6790 (Giftnotruf Berlin)

SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture

67/548/EEC or 1999/45/EC

Hazard Characteristics R-phrase(s)

Dangerous for the environment.; R52/53

2.2 Label Elements

Labeling according to Directive 1999/45/EC

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

2/18

Print Date 11.06.2013 000000019548

MSDS_DE

EC Symbols : No Hazard Symbol required

EC Classification : Dangerous for the environment.

EC Risk Phrases : R52/53 Harmful to aquatic organisms, may cause long-term

adverse effects in the aquatic environment.

EC Safety Phrases : S61 Avoid release to the environment. Refer to special

instructions/safety data sheets.

2.3 Other Hazards

Health Hazards : Not expected to be a health hazard when used under normal

conditions. Prolonged or repeated skin contact without proper

cleaning can clog the pores of the skin resulting in disorders

such as oil acne/folliculitis. High-pressure injection under the

skin may cause serious damage including local necrosis. Used

grease may contain harmful impurities.

Safety Hazards : Not classified as flammable but will burn.

Environmental Hazards : Harmful to aquatic organisms, may cause long-term adverse

effects in the aquatic environment.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substance

Material Name : Not applicable.

3.2 Mixtures

Mixture Description : A lubricating grease containing highly-refined mineral oils and

additives.

Hazardous Components

Classification of components according to Regulation (EC) No 1272/2008

Chemical Name CAS No. EC Number REACH Registration

No.

Conc.

Zinc alkyl

dithiophosphate

68649-42-3 272-028-3 Not available / Not

applicable.

1,00 - 2,40%

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

3/18

Print Date 11.06.2013 000000019548

MSDS_DE

Zinc naphthenate 12001-85-3 234-409-2 Not available / Not

applicable.

0,24 - 0,90%

Chemical Name Hazard Class & Category Hazard Statement

Zinc alkyl

dithiophosphate

Eye Dam., 2; Skin Corr., 2; Aquatic

Chronic, 2;

H319; H315; H411;

Zinc naphthenate Eye Dam., 2; Skin Corr., 2; Aquatic

Chronic, 1;

H319; H315; H410;

Classification of components according to 67/548/EEC

Chemical Name CAS No. EC

Number

REACH

Registration

No.

Symbol(s) R-phrase(s) Conc.

Zinc alkyl

dithiophosphate

68649-42-3 272-028-3 Not available

/ Not

applicable.

Xi, N R36/38;

R51/53

1,00 -

2,40%

Zinc

naphthenate

12001-85-3 234-409-2 Not available

/ Not

applicable.

Xi, N R36/38;

R50/53

0,24 -

0,90%

Additional Information : The highly refined mineral oil contains <3% (w/w) DMSOextract,

according to IP346.

Refer to Ch 16 for full text of R- and H- phrases.

This mixture does not contain any REACH registered

substances that are assessed to be a PBT or a vPvB.

SECTION 4. FIRST AID MEASURES

4.1 Description of First Aid Measures

General Information : Not expected to be a health hazard when used under normal

conditions.

Inhalation : No treatment necessary under normal conditions of use. If

symptoms persist, obtain medical advice.

Skin Contact : Remove contaminated clothing. Flush exposed area with water

and follow by washing with soap if available. If persistent

irritation occurs, obtain medical attention. When using high

pressure equipment, injection of product under the skin can

occur. If high pressure injuries occur, the casualty should be

sent immediately to a hospital. Do not wait for symptoms to

develop. Obtain medical attention even in the absence of

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

4/18

Print Date 11.06.2013 000000019548

MSDS_DE

apparent wounds.

Eye Contact : Flush eye with copious quantities of water. If persistent

irritation occurs, obtain medical attention.

Ingestion : In general no treatment is necessary unless large quantities

are swallowed, however, get medical advice.

Self-protection of the first

aider

: When administering first aid, ensure that you are wearing the

appropriate personal protective equipment according to the

incident, injury and surroundings.

4.2 Most important

symptoms and effects,

both acute and delayed

: Local necrosis is evidenced by delayed onset of pain and

tissue damage a few hours following injection. Oil

acne/folliculitis signs and symptoms may include formation of

black pustules and spots on the skin of exposed areas.

Ingestion may result in nausea, vomiting and/or diarrhoea.

4.3 Indication of any

immediate medical

attention and special

treatment needed

: Notes to doctor/physician:

Treat symptomatically.

High pressure injection injuries require prompt surgical

intervention and possibly steroid therapy, to minimise tissue

damage and loss of function.

Because entry wounds are small and do not reflect the

seriousness of the underlying damage, surgical exploration to

determine the extent of involvement may be necessary. Local

anaesthetics or hot soaks should be avoided because they can

contribute to swelling, vasospasm and ischaemia. Prompt

surgical decompression, debridement and evacuation of

foreign material should be performed under general

anaesthetics, and wide exploration is essential.

SECTION 5. FIRE FIGHTING MEASURES

Clear fire area of all non-emergency personnel.

5.1 Extinguishing Media : Foam, water spray or fog. Dry chemical powder, carbon

dioxide, sand or earth may be used for small fires only.

Unsuitable Extinguishing

Media

: Do not use water in a jet.

5.2 Special hazards

arising from the

substance or mixture

: Hazardous combustion products may include: A complex

mixture of airborne solid and liquid particulates and gases

(smoke). Carbon monoxide. Unidentified organic and inorganic

compounds.

5.3 Advice for firefighters : Proper protective equipment including chemical resistant

gloves are to be worn; chemical resistant suit is indicated if

large contact with spilled product is expected. Self-Contained

Breathing Apparatus must be worn when approaching a fire in

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

5/18

Print Date 11.06.2013 000000019548

MSDS_DE

a confined space. Select fire fighter's clothing approved to

relevant Standards (e.g. Europe: EN469).

SECTION 6. ACCIDENTAL RELEASE MEASURES

Avoid contact with spilled or released material. For guidance on selection of personal protective

equipment see Chapter 8 of this Material Safety Data Sheet. Observe the relevant local and

international regulations.

6.1 Personal Precautions,

Protective Equipment and

Emergency Procedures

: 6.1.1 For non emergency personnel: Avoid contact with skin

and eyes.

6.1.2 For emergency responders: Avoid contact with skin and

eyes.

6.2 Environmental

Precautions

: Use appropriate containment to avoid environmental

contamination. Prevent from spreading or entering drains,

ditches or rivers by using sand, earth, or other appropriate

barriers.

6.3 Methods and Material

for Containment and

Cleaning Up

: Shovel into a suitable clearly marked container for disposal or

reclamation in accordance with local regulations.

6.4 Reference to other

sections

: For guidance on selection of personal protective equipment

see Chapter 8 of this Material Safety Data Sheet. For guidance

on disposal of spilled material see Chapter 13 of this Material

Safety Data Sheet.

SECTION 7. HANDLING AND STORAGE

General Precautions : Use local exhaust ventilation if there is risk of inhalation of

vapours, mists or aerosols. Use the information in this data

sheet as input to a risk assessment of local circumstances to

help determine appropriate controls for safe handling, storage

and disposal of this material.

7.1 Precautions for Safe

Handling

: Avoid prolonged or repeated contact with skin. Avoid inhaling

vapour and/or mists. When handling product in drums, safety

footwear should be worn and proper handling equipment

should be used. Properly dispose of any contaminated rags or

cleaning materials in order to prevent fires. Keep container

tightly closed and in a cool, well-ventilated place. Use properly

labelled and closeable containers.

7.2 Conditions for safe

storage, including any

incompatibilities

: Store at ambient temperature.

Refer to section 15 for any additional specific legislation

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

6/18

Print Date 11.06.2013 000000019548

MSDS_DE

covering the packaging and storage of this product.

Recommended Materials : For containers or container linings, use mild steel or high

density polyethylene.

Unsuitable Materials : PVC.

7.3 Specific end use(s) : Please refer to Ch16 and/or the annexes for the registered

uses under REACH.

Additional Information : Polyethylene containers should not be exposed to high

temperatures because of possible risk of distortion.

Storage class according to TRGS 510: 10

Fire hazard classification: B

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

If the American Conference of Governmental Industrial Hygienists (ACGIH) value is provided on this

document, it is provided for information only.

8.1 Control Parameters

Occupational Exposure Limits

Material Source Type ppm mg/m3 Notation

Oil mist, mineral ACGIH TWA(Inhala

ble fraction.)

5 mg/m3

Additional Information : Due to the product's semi-solid consistency, generation of

mists and dusts is unlikely to occur.

Biological Exposure Index (BEI)

No biological limit allocated.

PNEC related information : Data not available

Monitoring Methods : Monitoring of the concentration of substances in the breathing

zone of workers or in the general workplace may be required to

confirm compliance with an OEL and adequacy of exposure

controls. For some substances biological monitoring may also

be appropriate. Validated exposure measurement methods

should be applied by a competent person and samples

analysed by an accredited laboratory. Examples of sources of

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

7/18

Print Date 11.06.2013 000000019548

MSDS_DE

recommended exposure measurement methods are given

below or contact the supplier. Further national methods may be

available.

National Institute of Occupational Safety and Health (NIOSH),

USA: Manual of Analytical Methods http://www.cdc.gov/niosh/

Occupational Safety and Health Administration (OSHA), USA:

Sampling and Analytical Methods http://www.osha.gov/

Health and Safety Executive (HSE), UK: Methods for the

Determination of Hazardous Substances

http://www.hse.gov.uk/

Institut für Arbeitsschutz Deutschen Gesetzlichen

Unfallversicherung (IFA), Germany.

http://www.dguv.de/inhalt/index.jsp

L'Institut National de Recherche et de Securité, (INRS), France

http://www.inrs.fr/accueil

8.2 Exposure Controls

General Information : The level of protection and types of controls necessary will vary

depending upon potential exposure conditions. Select controls

based on a risk assessment of local circumstances.

Appropriate measures include: Adequate ventilation to control

airborne concentrations. Where material is heated, sprayed or

mist formed, there is greater potential for airborne

concentrations to be generated.

Define procedures for safe handling and maintenance of

controls. Educate and train workers in the hazards and control

measures relevant to normal activities associated with this

product. Ensure appropriate selection, testing and

maintenance of equipment used to control exposure, e.g.

personal protective equipment, local exhaust ventilation. Drain

down system prior to equipment break-in or maintenance.

Retain drain downs in sealed storage pending disposal or for

subsequent recycle. Always observe good personal hygiene

measures, such as washing hands after handling the material

and before eating, drinking, and/or smoking. Routinely wash

work clothing and protective equipment to remove

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

8/18

Print Date 11.06.2013 000000019548

MSDS_DE

contaminants. Discard contaminated clothing and footwear that

cannot be cleaned. Practice good housekeeping.

Occupational Exposure Controls

Personal Protective

Equipment

: The provided information is made in consideration of the PPE

directive (Council Directive 89/686/EEC) and the CEN

European Committee for Standardisation (CEN) standards.

Personal protective equipment (PPE) should meet

recommended national standards. Check with PPE suppliers.

Eye Protection : Wear safety glasses or full face shield if splashes are likely to

occur. Approved to EU Standard EN166.

Hand Protection : Where hand contact with the product may occur the use of

gloves approved to relevant standards (e.g. Europe: EN374,

US: F739) made from the following materials may provide

suitable chemical protection: PVC, neoprene or nitrile rubber

gloves. Suitability and durability of a glove is dependent on

usage, e.g. frequency and duration of contact, chemical

resistance of glove material, dexterity. Always seek advice

from glove suppliers. Contaminated gloves should be replaced.

Personal hygiene is a key element of effective hand care.

Gloves must only be worn on clean hands. After using gloves,

hands should be washed and dried thoroughly. Application of a

non-perfumed moisturizer is recommended.

For continuous contact we recommend gloves with

breakthrough time of more than 240 minutes with preference

for > 480 minutes where suitable gloves can be identified. For

short-term/splash protection we recommend the same, but

recognise that suitable gloves offering this level of protection

may not be available and in this case a lower breakthrough

time may be acceptable so long as appropriate maintenance

and replacement regimes are followed. Glove thickness is not

a good predictor of glove resistance to a chemical as it is

dependent on the exact composition of the glove material.

Body protection : Skin protection not ordinarily required beyond standard issue

work clothes.

Respiratory Protection : No respiratory protection is ordinarily required under normal

conditions of use. In accordance with good industrial hygiene

practices, precautions should be taken to avoid breathing of

material. If engineering controls do not maintain airborne

concentrations to a level which is adequate to protect worker

health, select respiratory protection equipment suitable for the

specific conditions of use and meeting relevant legislation.

Check with respiratory protective equipment suppliers. Where

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

9/18

Print Date 11.06.2013 000000019548

MSDS_DE

air-filtering respirators are suitable, select an appropriate

combination of mask and filter. Select a filter suitable for

combined particulate/organic gases and vapors [Type A/Type

P boiling point > 65°C (149°F)] meeting EN14387 and EN143.

Thermal Hazards : Not applicable.

Environmental Exposure Controls

Environmental exposure

control measures

: Take appropriate measures to fulfil the requirements of

relevant environmental protection legislation. Avoid

contamination of the environment by following advice given in

Chapter 6. If necessary, prevent undissolved material from

being discharged to waste water. Waste water should be

treated in a municipal or industrial waste water treatment plant

before discharge to surface water. Local guidelines on

emission limits for volatile substances must be observed for the

discharge of exhaust air containing vapour.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties

Appearance : Red. Semi-solid at ambient temperature.

Odour : Slight hydrocarbon.

Odour threshold : Data not available

pH : Not applicable.

Initial Boiling Point and

Boiling Range

: Data not available

Dropping point : Typical 240 °C / 464 °F

Flash point : > 250 °C / 482 °F (COC)

Upper / lower Flammability

or Explosion limits

: Typical 1 - 10 %(V) (based on mineral oil)

Auto-ignition temperature : > 320 °C / 608 °F

Vapour pressure : < 0,5 Pa at 20 °C / 68 °F (estimated value(s))

Relative Density : Typical 0,9 at 15 °C / 59 °F

Density : Typical 900 kg/m3 at 15 °C / 59 °F

Water solubility : Negligible.

Solubility in other solvents : Data not available

n-octanol/water partition

coefficient (log Pow)

: > 6 (based on information on similar products)

Dynamic viscosity : Data not available

Kinematic viscosity : Not applicable.

Vapour density (air=1) : > 1 (estimated value(s))

Evaporation rate (nBuAc=1) : Data not available

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

10/18

Print Date 11.06.2013 000000019548

MSDS_DE

Decomposition

Temperature

: Data not available

Flammability : Data not available

Oxidizing Properties : Data not available

Explosive Properties : Not classified

9.2 Other Information

Electrical conductivity : This material is not expected to be a static accumulator.

Other Information : not a VOC

Volatile organic compound : 0 %

SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity : The product does not pose any further reactivity hazards in

addition to those listed in the following sub-paragraph.

10.2 Chemical stability : No hazardous reaction is expected when handled and stored

according to provisions.

10.3 Possibility of

Hazardous Reactions

:

Reacts with strong oxidising agents.

10.4 Conditions to Avoid : Extremes of temperature and direct sunlight.

10.5 Incompatible

Materials

: Strong oxidising agents.

10.6 Hazardous

Decomposition Products

: Hazardous decomposition products are not expected to form

during normal storage.

SECTION 11. TOXICOLOGICAL INFORMATION

11.1 Information on Toxicological effects

Basis for Assessment : Information given is based on data on the components and the

toxicology of similar products.

Unless indicated otherwise, the data presented is

representative of the product as a whole, rather than for

individual component(s).

Likely Routes of

Exposure

: Skin and eye contact are the primary routes of exposure

although exposure may occur following accidental ingestion.

Acute Oral Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg , Rat

Acute Dermal Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg , Rabbit

Acute Inhalation Toxicity : Not considered to be an inhalation hazard under normal

conditions of use.

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

11/18

Print Date 11.06.2013 000000019548

MSDS_DE

Skin corrosion/irritation : Expected to be slightly irritating. Prolonged or repeated skin

contact without proper cleaning can clog the pores of the skin

resulting in disorders such as oil acne/folliculitis.

Serious eye

damage/irritation

: Expected to be slightly irritating.

Respiratory Irritation : Inhalation of vapours or mists may cause irritation.

Respiratory or skin

sensitisation

: For respiratory and skin sensitisation: Not expected to be a

sensitiser.

Aspiration Hazard : Not considered an aspiration hazard.

Germ cell mutagenicity : Not considered a mutagenic hazard.

Carcinogenicity : Not expected to be carcinogenic. Product contains mineral oils

of types shown to be non-carcinogenic in animal skin-painting

studies. Highly refined mineral oils are not classified as

carcinogenic by the International Agency for Research on

Cancer (IARC).

Material : Carcinogenicity Classification

Highly refined mineral oil

(IP346 <3%)

: ACGIH Group A4: Not classifiable as a human carcinogen.

Highly refined mineral oil

(IP346 <3%)

: IARC 3: Not classifiable as to carcinogenicity to humans.

Highly refined mineral oil

(IP346 <3%)

: GHS / CLP: No carcinogenicity classification

Reproductive and

Developmental Toxicity

: Not expected to be a hazard.

Summary on evaluation of the CMR properties

Carcinogenicity : This product does not meet the criteria for classification in

categories 1A/1B.,

Mutagenicity : This product does not meet the criteria for classification in

categories 1A/1B.

Reproductive Toxicity

(fertility)

: This product does not meet the criteria for classification in

categories 1A/1B.

Specific target organ

toxicity - single exposure

: Not expected to be a hazard.

Specific target organ

toxicity - repeated

exposure

: Not expected to be a hazard.

Additional Information : Used grease may contain harmful impurities that have

accumulated during use. The concentration of such harmful

impurities will depend on use and they may present risks to

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

12/18

Print Date 11.06.2013 000000019548

MSDS_DE

health and the environment on disposal. ALL used grease

should be handled with caution and skin contact avoided as far

as possible. High pressure injection of product into the skin

may lead to local necrosis if the product is not surgically

removed.

Classifications by other authorities under varying regulatory

frameworks may exist.

SECTION 12. ECOLOGICAL INFORMATION

Basis for Assessment : Ecotoxicological data have not been determined specifically for

this product. Information given is based on a knowledge of the

components and the ecotoxicology of similar products. Unless

indicated otherwise, the data presented is representative of the

product as a whole, rather than for individual component(s).

12.1 Toxicity

Acute Toxicity : Poorly soluble mixture. May cause physical fouling of aquatic

organisms. Expected to be harmful: LL/EL/IL50 10-100 mg/l (to

aquatic organisms) LL/EL50 expressed as the nominal amount

of product required to prepare aqueous test extract.

12.2 Persistence and

degradability

: Expected to be not readily biodegradable. Major constituents

are expected to be inherently biodegradable, but the product

contains components that may persist in the environment.

12.3 Bioaccumulative

Potential

: Contains components with the potential to bioaccumulate.

12.4 Mobility in Soil : Semi-solid under most environmental conditions. If it enters

soil, it will adsorb to soil particles and will not be mobile. Floats

on water.

12.5 Result of PBT and

vPvB assesment

: This mixture does not contain any REACH registered

substances that are assessed to be a PBT or a vPvB.

12.6 Other Adverse

Effects

: Product is a mixture of non-volatile components, which are not

expected to be released to air in any significant quantities. Not

expected to have ozone depletion potential, photochemical

ozone creation potential or global warming potential.

Contains zinc naphthenate. Very toxic: LC/EC/IC50 0.1 - 1 mg/l

(to aquatic organisms)

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

13/18

Print Date 11.06.2013 000000019548

MSDS_DE

SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste Treatment Methods

Material Disposal : Recover or recycle if possible. It is the responsibility of the

waste generator to determine the toxicity and physical

properties of the material generated to determine the proper

waste classification and disposal methods in compliance with

applicable regulations. Do not dispose into the environment, in

drains or in water courses.

Container Disposal : Dispose in accordance with prevailing regulations, preferably to

a recognised collector or contractor. The competence of the

collector or contractor should be established beforehand.

Local Legislation : Disposal should be in accordance with applicable regional,

national, and local laws and regulations.

EU Waste Disposal Code (EWC): 12 01 12 spent waxes and

fats. Classification of waste is always the responsibility of the

end user.

SECTION 14. TRANSPORT INFORMATION

Land transport (ADR/RID):

ADR

This product is not classified as dangerous for this mode of transport. Therefore 14.1 UN

Number, 14.2 UN Proper Shipping name, 14.3 Transport hazard class(es), 14.4 Packing group,

14.5 Environmental hazards, 14.6 Special precautions for user do not apply.

RID

This product is not classified as dangerous for this mode of transport. Therefore 14.1 UN

Number, 14.2 UN Proper Shipping name, 14.3 Transport hazard class(es), 14.4 Packing group,

14.5 Environmental hazards, 14.6 Special precautions for user do not apply.

Inland waterways transport (ADN):

This product is not classified as dangerous for this mode of transport. Therefore 14.1 UN

Number, 14.2 UN Proper Shipping name, 14.3 Transport hazard class(es), 14.4 Packing group,

14.5 Environmental hazards, 14.6 Special precautions for user do not apply.

CDNI Inland Water Waste

Agreement

: NST 3411 Greases

Sea transport (IMDG Code):

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

14/18

Print Date 11.06.2013 000000019548

MSDS_DE

This product is not classified as dangerous for this mode of transport. Therefore 14.1 UN

Number, 14.2 UN Proper Shipping name, 14.3 Transport hazard class(es), 14.4 Packing group,

14.5 Environmental hazards, 14.6 Special precautions for user do not apply.

Air transport (IATA):

This product is not classified as dangerous for this mode of transport. Therefore 14.1 UN

Number, 14.2 UN Proper Shipping name, 14.3 Transport hazard class(es), 14.4 Packing group,

14.5 Environmental hazards, 14.6 Special precautions for user do not apply.

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

Pollution Category : Not applicable.

Ship Type : Not applicable.

Product Name : Not applicable.

Special Precaution : Not applicable.

Additional Information : MARPOL Annex 1 rules apply for bulk shipments by sea.

ADN - Classified ID9006 only when carried in tank vessels.

SECTION 15. REGULATORY INFORMATION

The regulatory information is not intended to be comprehensive. Other regulations may apply to this

material.

15.1 Safety, health and environmental regulations/legislation specific for the substance or

mixture

Other regulatory Information

Authorisations and/or

restrictions on use

: Product is not subject to Authorisation under REACH.

Recommended

Restrictions on Use

(Advice Against)

: This product must not be used in applications other than those

recommended in Section 1, without first seeking the advice of

the supplier.

Chemical Inventory Status

EINECS :All components

listed or polymer

exempt.

TSCA :All components

listed.

National Legislation

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

15/18

Print Date 11.06.2013 000000019548

MSDS_DE

Water Pollution Class : WGK 2 - hazard to waters (appendix 2, VwVwS, preparations).

Other Information : Technische Anleitung Luft: Product not listed by name.

Observe section 5.2.5 in connection with section 5.4.9

Contains component(s) which are restricted for use with young

people.

15.2 Chemical Safety

Assessment

: No Chemical Safety Assessment has been carried out for this

substance/mixture by the supplier.

SECTION 16. OTHER INFORMATION

R-phrase(s)

R36/38 Irritating to eyes and skin.

R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the

aquatic environment.

R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic

environment.

R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the

aquatic environment.

CLP Hazard Statements

H315 Causes skin irritation.

H319 Causes serious eye irritation.

H410 Very toxic to aquatic life with long lasting effects.

H411 Toxic to aquatic life with long lasting effects.

Additional Information : No Exposure Scenario annex is attached to this safety data

sheet. It is a non-classified mixture containing hazardous

substances as detailed in Section 3; relevant information from

Exposure Scenarios for the hazardous substances contained

have been integrated into the core sections 1-16 of this SDS.

Other Information

Abbreviations and

Acronyms

: Acute Tox. = Acute toxicity

Asp. Tox. = Aspiration hazard

Aquatic Acute = Acute hazards to the aquatic environment

Aquatic Chronic = Hazardous to the aquatic environment -

Long-term Hazard

Eye Dam. = Serious eye damage/eye irritation

Flam. Liq. = Flammable liquids

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

16/18

Print Date 11.06.2013 000000019548

MSDS_DE

Skin Corr. = Skin corrosion/irritation

Skin Sens. = Skin sensitizer

STOT SE = Specific target organ toxicity - single exposure

STOT RE = Specific target organ toxicity - repeated exposure

The standard abbreviations and acronyms used in this

document can be looked up in reference literature (e.g.

scientific dictionaries) and/or websites.

ADN = European Agreement concerning the international

carriage of dangerous goods by inland waterways (ADN)

DFG = Federal Institute of Hydrology

EG = European Community

EN = European Norm

IBC = Intermediate Bulk Container

ISO = International Standards Organisation

MAK = Maximum workplace concentration

OECD = Organisation for economic cooperation and

development

OEL = Occupational Exposure Limits

PSA = Personal protective equipment

TRGS = Technical rules for hazardous substances

VO = Regulation

VOC = Volatile Organic Compounds

VwVwS = Water administrative pollutants

WGK = Water Hazard Class

ACGIH = American Conference of Governmental Industrial

Hygienists

ADR = European Agreement concerning the International

Carriage of Dangerous Goods by Road

AICS = Australian Inventory of Chemical Substances

ASTM = American Society for Testing and Materials

BEL = Biological exposure limits

BTEX = Benzene, Toluene, Ethylbenzene, Xylenes

CAS = Chemical Abstracts Service

CEFIC = European Chemical Industry Council

CLP = Classification Packaging and Labelling

COC = Cleveland Open-Cup

DIN = Deutsches Institut fur Normung

DMEL = Derived Minimal Effect Level

DNEL = Derived No Effect Level

DSL = Canada Domestic Substance List

EC = European Commission

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

17/18

Print Date 11.06.2013 000000019548

MSDS_DE

EC50 = Effective Concentration fifty

ECETOC = European Center on Ecotoxicology and Toxicology

Of Chemicals

ECHA = European Chemicals Agency

EINECS = The European Inventory of Existing Commercial

Chemical Substances

EL50 = Effective Loading fifty

ENCS = Japanese Existing and New Chemical Substances

Inventory

EWC = European Waste Code

GHS = Globally Harmonised System of Classification and

Labelling of Chemicals

IARC = International Agency for Research on Cancer

IATA = International Air Transport Association

IC50 = Inhibitory Concentration fifty

IL50 = Inhibitory Level fifty

IMDG = International Maritime Dangerous Goods

INV = Chinese Chemicals Inventory

IP346 = Institute of Petroleum test method N° 346 for the

determination of polycyclic aromatics DMSO-extractables

KECI = Korea Existing Chemicals Inventory

LC50 = Lethal Concentration fifty

LD50 = Lethal Dose fifty per cent.

LL/EL/IL = Lethal Loading/Effective Loading/Inhibitory loading

LL50 = Lethal Loading fifty

MARPOL = International Convention for the Prevention of

Pollution From Ships

NOEC/NOEL = No Observed Effect Concentration / No

Observed Effect Level

OE_HPV = Occupational Exposure - High Production Volume

PBT = Persistent, Bioaccumulative and Toxic

PICCS = Philippine Inventory of Chemicals and Chemical

Substances

PNEC = Predicted No Effect Concentration

REACH = Registration Evaluation And Authorisation Of

Chemicals

RID = Regulations Relating to International Carriage of

Dangerous Goods by Rail

SKIN_DES = Skin Designation

STEL = Short term exposure limit

TRA = Targeted Risk Assessment

TSCA = US Toxic Substances Control Act

TWA = Time-Weighted Average

vPvB = very Persistent and very Bioaccumulative

Shell Gadus S3 V220C 2

Version 3.0

Effective Date 10.06.2013

Safety Data Sheet

Regulation 1907/2006/EC

18/18

Print Date 11.06.2013 000000019548

MSDS_DE

SDS Distribution : The information in this document should be made available to

all who may handle the product.

SDS Version Number : 3.0

SDS Effective Date : 10.06.2013

SDS Revisions : A vertical bar (|) in the left margin indicates an amendment

from the previous version.

SDS Regulation : Regulation 1907/2006/EC as amended by Regulation (EU)

453/2010

Disclaimer : This information is based on our current knowledge and is

intended to describe the product for the purposes of health,

safety and environmental requirements only. It should not

therefore be construed as guaranteeing any specific property

of the product.